LUGB Vortex Flow Meter
Basic Info
Model No.: LUGB
Product Description
Description
The Vortex Flow Meter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline The periodic shedding of eddies occurs first from one side and then from the Other side of a bluff body (vortex-shedding body) installed perpendicular to the pipe axis. Vortex shedding generates a so-called "Karman vortex street" with alternating pressure conditions whose frequency is proportional to the flow velocity.
Application
Pharmaceutical, foodstuff, beverage,etc...
■ ASIC large scale integrated circuit design, small size;
■ Low current offset≤ 50uV,temperature drift<1uV/°C;
■ Programmable filter for aperiodic vibration remove;
■ Intelligent control, no need to manual debugging;
· Application range (1)Gas;(2)Liquid;(3)Steam Measured Value Primary measured value Flow Rate Secondary measured value Volume flow; Temperature Process Temperature T1 Level:-20...+100℃ T2 Level:-20...+250℃ T3 Level:-20...+350℃ Ambient Temperature -10...+70℃ Pressure EN 1092-1 DN200-DN300: PN10 DN100-DN200: PN16 DN15-DN80: PN25 Other pressures on request ASME B16.5 1/2"-8":150lb RF Other pressures on request JIS 1/2"-8": 10K Other pressures on request Reference conditions Flow conditions similar to EN 29104 Medium: Water/Gas/Steam Electrical conductivity:≥300uS/cm Temperature: -10-+30℃ Inlet section:≥10 DN Operating pressure: 1bar/14.5 PSIG Flow Meter Accuracy For Liquid: 1.0% of Rate For Gas and Steam: 1.5% of Rate Body Material SS304 SS316 Converter Material Standard: Polyurethane coated die-cast aluminum 
(Pressure and Temperature is available )
Product Categories : Vortex Flow Meter